Product Details (This product is current)
DE008 - Crank Cycle Timer
  Monday, October 18, 2010
  Monday, October 18, 2010

Product Ref No: 139
Order No/Series: DE008

Pricing: $180.00 per unit
This is indicative only. Call for current pricing.

get more info
Once Added, Products will be added to the list at the top of the website.
Click the email icon to submit your request(s).

Products by this Supplier
  » DE002/7 - Speed Sensing Rela.. 
  » DE004 - Engine Protection Mo.. 
  » DE006 - Autostart Module 
  » DE008 - Crank Cycle Timer 
  » DE011 - Under/Over Voltage A.. 
  » DE015 - Reverse Power Relay 
  » DE025 - Phase Failure Relay 
  » DE097 - Speed Sensor 
  » View all above...
DE008 - Crank Cycle Timer

The Crank Cycle timer (DE008) is a small unit intended for use as a starter motor cranking timer in auto start standby alternators.
It is housed in an impact resistant polystyrene case with connections brought out as an eleven pin base to plug into a conventional relay socket.
On application of a 24V DC signal, an internal relay will function for a preset time then release. Up to four cycles may be programmed. A "failed to start" signal will be activated if the input voltage is not removed before the last crank cycle.
The unit must be de-energised externally when the engine comes up to speed.
Supply voltage: 24V DC
Relay contacts: One changeover on crank relay.
One change over on failed to start
Contact rating: 24V 4 Amp DC resistive load
Timer: Adjustable 4 to 20 seconds
Number of cycles: 1, 2, 3 or 4 externally programmable
On/Off ratio: fixed at 1:1
Programming: Terminals 5, 6 and 7 select number of start attempts
1 cycle: No linking required
2 cycle: Link T5 to T7
3 cycle: Link T6 to T7
4 cycle: Link T5, T6 and T7
PRICE: $180
request info

It's 4:23 AM in South Australia.
Please contact us via email.
The Crank Cycle timer (DE008) is a small unit, housed in an impact resistant polystyrene case, intended .....
Switchmode Power Supplies offer high power output in small packages, combined with DIN rail mounting, they become .....
The GM-010 S.C.O. SPEED SWITCH is a panel mounted printed circuit board (PCB) assembly intended primarily for .....
The Auto start module (DE006) is used to automatically start-up and to bring on-line a standby generator .....