For more info email:
Product Details (This product is current)
GM022 - Battery Charger(Auto Linear 30A)
  Thursday, October 7, 2010
  Wednesday, June 13, 2018

Product Ref No: 124
Order No/Series: GM022

Pricing: $950.00 per unit
This is indicative only. Call for current pricing.

get more info
Once Added, Products will be added to the list at the top of the website.
Click the email icon to submit your request(s).

Products by this Supplier
  » DIN Rail Power Supplies 
  » GM 032 (Battery Monitor) 
  » GM010 - SCO Speed Switch 
  » GM012 - Dual Speed Switch 
  » GM013 - Battery Charger 
  » GM014 - Battery Charger 
  » GM016 - Repeat Start Timer 
  » GM022 - Battery Charger 
  » GM023 - Battery Charger 
  » GM205 - Battery Charger 
  » Open Frame Power Supplies 
  » Transformer Module (GM 180) 
  » View all above...
GM022 - Battery Charger(Auto Linear 30A)

The GM022 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. The charging characteristic is initially a constant current which automatically tapers off to a very low level of trickle current as the battery voltage rises towards the charger float voltage output. The float voltage and maximum current output levels are easily preset by controls on the unit.

A boost condition can be introduced which causes the full constant current to flow (irrespective of battery voltage). A boost timer is incorporated which resets the charger to normal automatic float charging irrespective of the position of the boost switch, after four hours.

Battery undervoltage and overvoltage are monitored and individual relays are energized and LED lamps are illuminated when the battery voltage exceeds the preset limit. Isolated change over relay contacts are provided for both alarms. A low voltage delay timer can be set to 150 seconds to prevent nuisance low voltage alarms during engine cranking. The Power Fail relay is energised with power applied.

NOTE: Charger output must be turned off when batteries are disconnected.


Input supply:

mains 240V 50Hz (other voltages and frequency available)
Output voltage: 12 or 24VDC (specify on order)
Output current: 30A maximum continuous
Operational temperature range: 0 - 60 C ambient
Relay contacts: 10A resistive, High volts, Low Volts, Power Fail
Control potentiometer 1: Set float voltage (factory preset)
Control potentiometer 2: Set maximum current (factory preset)
Control potentiometer 3: Set low output voltage - battery charger fail (factory preset)

Control potentiometer 4:

Set high output voltage (factory preset)

PRICE: $950
request info

It's 5:00 AM in South Australia.
Please contact us via email.
The Delta reverse power relay is used in conjunction with load sensing circuits, e.g. Woodward 2301 load .....
The GM016 REPEAT START TIMER is a low cost printed circuit board (PCB) assembly designed for panel .....
The GM-012 DUAL SPEED SWITCH is a low cost printed circuit board (PCB) assembly for use as .....
The DE 011 is a single phase voltage sensing alarm with built in time delays. The time .....